International Journal of Scientific & Engineering Research, Volume 4, Issue 7, July-2013 2536
ISSN 2229-5518
Wireless Communication With LED
Gurucharran.R.S , Vivek Reddy.T
at a conference, you have probably gotten frustrated at the slow speeds you face when more than one device is tapped into the network. As more and more people and their man y devices access wireless internet, clogged airwaves are going to make it. One germen phycist.Harald Haas has come up with a solution he calls “data through illumination” –taking the fibber out of fiber optic by s ending data through an LED light bulb that varies in intensity faster than the human eye can follow. It’s the same idea band behind infrared remote controls but far more powerful. Haas says his invention, which he calls D-LIGHT, can produce data rates faster than 10 megabits persecond, which is speedier than your aver age broadband connection. He envisions a future where data for laptops, smart phones, and tablets is transmitted through the light in a room. And security would be snap – if you can ’t see the light, you can’t access the data.
—————————— ——————————
1.INTRODUCTION
LiFi is transmission of data through illumination by taking the fiber out of fiber optics by sending data through a LED light bulb that varies in intensity faster than the human eye can follow.Li-Fi is the term some have used to label the fast and cheap wireless- communication system, which is the optical version of Wi-Fi. The term was first used in this context by Harald Haas in his TED Global talk on Visible Light Communication. “At the heart of this technology is a new generation of high brightness light-emitting diodes”, says Harald Haas from the University of Edinburgh, UK,”Very simply, if the LED is on, you transmit a digital 1, if it’s off you transmit a 0,”Haas says, “They can be switched on and off very quickly, which gives nice opportunities for transmitted data.”It is possible to encode data in the light by varying the rate at which the LEDs flicker on and off to give different strings of 1s and 0s.The LED intensity is modulated so rapidly that human eye cannot notice, so the output appears constant. More sophisticated techniques could dramatically increase VLC data rate. Terms at the University of Oxford and the University of Edingburgh are focusing on parallel data transmission using array of LEDs, where each LED transmits a different data stream. Other group are using mixtures of red, green and blue LEDs to alter the light frequency encoding a different data channel.Li-Fi, as it has been dubbed, has already achieved blisteringly high speed in the lab. Researchers at the Heinrich Hertz Institute in Berlin,Germany,have reached data rates of over 500 megabytes per second using a standard white-light LED. The technology was demonstrated at the 2012 Consumer Electronics Show in Las Vegas using a pair of Casio smart phones to exchange data using light of varying intensity given off from their screens, detectable at a distance of up to ten metres.
Fig.1 Li-Fi enviorment
In October 2011 a number of companies and industry groups formed the Li-Fi Consortium, to promote high- speed optical wireless systems and to overcome the limited amount of radio- based wireless spectrum available by exploiting a completely different part of the electromagnetic spectrum. The consortium believes it is possible to achieve more than 10 Gbps, theoretically allowing a high-definition film to be downloaded in 30 seconds.
2.WORKING TECHNOLOGY
This brilliant idea was first showcased by Harald Haas from University of Edinburgh, UK, in his TED Global talk on VLC. He explained,” Very simple, if the LED is on, you transmit a digital 1, if it’s off you transmit a
0. The LEDs can be switched on and off very quickly, which gives nice opportunities for transmitting data.” So what you require at all are some LEDs and a controller that code data into those LEDs. We have to just vary the rate at which the LED’s flicker depending upon the data we want to encode. Further
IJSER © 2013 http://www.ijser.org
International Journal of Scientific & Engineering Research, Volume 4, Issue 7, July-2013 2537
ISSN 2229-5518
enhancements can be made in this method, like using an array of LEDs for parallel data transmission, or using mixtures of red, green and blue LEDs to alter the light’s frequency with each frequency encoding a different data channel. Such advancements promise a theoretical speed of 10 Gbps – meaning you can download a full high-definition film in just 30 seconds. Simply awesome! But blazingly fast data rates and depleting bandwidths worldwide are not the only reasons that give this technology an upper hand. Since Li-Fi uses just the light, it can be used safely in aircrafts and hospitals that are prone to interference from radio waves. This can even work underwater where Wi-Fi fails completely, thereby throwing open endless opportunities for military operations. Imagine only needing to hover under a street lamp to get public internet access, or downloading a movie from the lamp on your desk. There's a new technology on the block which could, quite literally as well as metaphorically,
'throw light on' how to meet the ever-increasing demand for high-speed wireless connectivity. Radio waves are replaced by light waves in a new method of data transmission which is being called Li-Fi.Light- emitting diodes can be switched on and off faster than
the human eye can detect, causing the light source to appear to be on continuously. A flickering light can be incredibly annoying, but has turned out to have its upside, being precisely what makes it possible to use light for wireless data transmission. Light-emitting diodes (commonly referred to as LEDs and found in traffic and street lights, car brake lights, remote control units and countless other applications) can be switched on and off faster than the human eye can detect, causing the light source to appear to be on continuously, even though it is in fact 'flickering'. This invisible on-off activity enables a kind of data transmission using binary codes: switching on an LED is a logical '1', switching it off is a logical '0'. Information can therefore be encoded in the light by varying the rate at which the LEDs flicker on and off to give different strings of 1s and 0s. This method of using rapid pulses of light to transmit information wirelessly is technically referred to as Visible Light Communication (VLC), though it’s potential to compete with conventional Wi-Fi has inspired the popular characterisation Li-Fi.
LiFi (Light Fidelity) is a fast and cheap optical version of
Wi-
Fi, the technology of which is based on Visible
Light Communication (VLC).VLC is a data
communication medium, which uses visible light
between 400 THz (780 nm) and 800 THz (375 nm) as
optical carrier for data transmission and illumination. It
uses fast pulses of light to transmit information
wirelessly. The main components of this
communication system are 1) a high brightness white
LED, Which acts as a communication source and 2)
a silicon photodiode which shows good response to
visible wavelength region serving as the receiving element? LED can be switched on and off to generate digital strings of 1s and 0s. Data can be encoded in the light to generate a new data stream by varying the flickering rate of the LED. To be clearer, by modulating the LED light with the data signal, the LED
illumination can be used as a communication source. As the flickering rate is so fast, the LED output appears constant to the human eye. A data rate of greater than
100 Mbps is possible by using high speed LEDs with appropriate multiplexing techniques. VLC data rate can be increased by parallel data transmission using LED arrays where each LED transmits a different data stream. There are reasons to prefer LED as the light source in VLC while a lot of other illumination devices like fluorescent lamp, incandescent bulb etc. are available.
Fig 2.Data transmission using
LED
3.COMPARISION BETWEEN Li-Fi & Wi-Fi
LI-FI is a term of one used to describe visible light communication technology applied to high speed wireless communication. It acquired this name due to the similarity to WI-FI, only using light instead of radio.WI-FI is great for general wireless coverage within buildings, and li-fi is ideal for high density wireless data coverage in confined area and for relieving radio interference issues, so the two technologies can be considered complimentary.
IJSER © 2013 http://www.ijser.org
International Journal of Scientific & Engineering Research, Volume 4, Issue 7, July-2013 2538
ISSN 2229-5518
Wi-Fi – IEEE 802.11n | 150 Mbps | * |
Bluetooth | 3 Mbps | * |
IrDA | 4 Mbps | *** |
Wireless (future) | ||
WiGig | 2 Gbps | ** |
Giga-IR | 1 Gbps | *** |
Li-Fi | >1Gbps | **** |
Table 1.Comparison between current and future wireless technology
The table also contains the current wireless technologies that can be used for transferring data between devices today, i.e. Wi-Fi, Bluetooth and IrDA. Only Wi-Fi currently offers very high data rates. The IEEE 802.11.n in most implementations provides up to 150Mbit/s (in theory the standard can go to 600Mbit/s) although in practice you receive considerably less than this. Note that one out of three of these is an optical technology.
Li-Fi technology is based on LEDs for the transfer of data. The transfer of the data can be with the help of all kinds of light, no matter the part of the spectrum that they belong. That is, the light can belong to the invisible, ultraviolet or the visible part of the spectrum. Also, the speed of the internet is incredibly high and you can download movies, games, music etc in just a few minutes with the help of this technology. Also, the technology removes limitations that have been put on the user by the Wi-Fi. You no more need to be in a region that is Wi-Fi enabled to have access to the internet. You can simply stand under any form of light and surf the internet as the connection is made in case of any light presence. There cannot be anything better than this technology
Fig 3.Working and
advantages
4.APPLICATION OF LI-FI
For a long time, medical technology has lagged behind the rest of the wireless world. Operating rooms do not allow Wi-Fi over radiation concerns, and there is also that whole lack of dedicated spectrum. While Wi-Fi is in place in many hospitals, interference from cell phones and computers can block signals from monitoring equipment. Li-Fi solves both problems: lights are not only allowed in operating rooms, but tend to be the most glaring (pun intended) fixtures in the room. And, as Haas mentions in his TED Talk, Li-Fi has 10,000 times the spectrum of Wi-Fi, so maybe we can, I dunno, delegate red light to priority medical data. Code Red!
Airline Wi-Fi. Ugh. Nothing says captive audience like having to pay for the "service" of dial-up speed Wi-Fi on the plane. And don’t get me started on the pricing. The best I’ve heard so far is that passengers will "soon" be offered a "high-speed like" connection on some airlines. United is planning on speeds as high as 9.8
Mbps per plane. Uh, I have twice that capacity in my
living room. And at the same price as checking a bag, I
expect it. Li-Fi could easily introduce that sort of
IJSER © 2013 http://www.ijser.org
International Journal of Scientific & Engineering Research, Volume 4, Issue 7, July-2013 2539
ISSN 2229-5518
speed to each seat's reading light. I’ll be the guy WoWing next to you. Its better than listening to you tell me about your wildly successful son, ma’am.
Wi-Fi and many other radiation types are bad for sensitive areas. Like those surrounding power plants. But power plants need fast, inter-connected data systems to monitor things like demand, grid integrity and (in nuclear plants) core temperature. The savings from proper monitoring at a single power plant can add up to hundreds of thousands of dollars. Li-Fi could offer safe, abundant connectivity for all areas of these sensitive locations. Not only would this save money related to currently implemented solutions, but the draw on a power plant’s own reserves could be lessened if they haven’t yet converted to LED lighting
Underwater ROVs, those favourite toys of treasure seekers and James Cameron, operate from large cables that supply their power and allow them to receive signals from their pilots above. ROVs work great, except when the tether isn’t long enough to explore an area, or when it gets stuck on something. If their wires were cut and replaced with light — say from a submerged, high- powered lamp — then they would be much freer to explore. They could also use their headlamps to communicate with each other, processing data autonomously and referring findings periodically back to the surface, all the while obtaining their next batch of orders.
Say there’s an earthquake in New York. Or a hurricane. Take your pick — it’s a wacky city. The average New Yorker may not know what the protocols are for those kinds of disasters. Until they pass under a street light, that is. Remember, with Li-Fi, if there’s light, you’re online. Subway stations and tunnels, common dead zones for most emergency communications, pose no obstruction. Plus, in times less stressing cities could opt to provide cheap high-speed Web access to every street corner.
5. USES IN VARIOUS AREAS
Can be used in plases where it is difficult to lay optical fiber like hospitals.In operation theatre Li-Fi can be used for modern medical instruments.In traffic signals Li-Fi can be used which will communicate with the cars and other vehicles and accidents can be decreased.Thousands and millions of street lamps can be transferred to Li-Fi lamps to transfer data.In aircrafts Li-Fi can be used for data transmission. It can be used in petroleum or chemical plants where other frequencies can be harmful
6. CONCLUSION
The possiblilities are numerious and can be explored further.If this technology can be put into practical use,every bulb can be used as Wi-Fi hotspot to transmit wireless data and we will proceed toward the greener and safer environment. The concept of Li-Fi attracts a great deal of interest, not least because it may offer a genuine and very efficient alternative to radio-based wirelesss. As a growing number of people and their many devices access wireless internet the airways are becoming clogged making it difficult for high speed signals. This may solve issues such as shortage of radio- frequency bandwidth and also internet where traditional based radio waves cannot be used in aircrafts. One of the shortcomings is that it can work only in the lione of sight.
IJSER © 2013 http://www.ijser.org
International Journal of Scientific & Engineering Research, Volume 4, Issue 7, July-2013 2540
ISSN 2229-5518
REFERENCES
[1] seminarprojects.com/s/seminar-report-on-lifi
[2] http://en.wikipedia.org/wiki/Li-Fi
[3] http://teleinfobd.blogspot.in/2012/01/what-is-lifi.html
[4] technopits.blogspot.comtechnology.cgap.org/2012/01/
11/a-lifi-world/
[5] www.lificonsortium.org/
[6] the-gadgeteer.com/2011/08/29/li-fi-internet-at-
the- speed-of-light/
[7] en.wikipedia.org/wiki/Li-Fi
[8] www.macmillandictionary.com/buzzword/entries/Li-
Fi.html
[9] dvice.com/archives/2012/08/lifi-ten-ways-i.php
[10] 8. Will Li-Fi be the new Wi-Fi?, New Scientist, by
Jamie Condliffe, dated 28 July
2011 [11]
http://www.digplanet.com/wiki/Li-Fi
[12] 10.”Visible-light communication: Tripping the
light fantastic: A fast and cheap optical version
of Wi-Fi is coming”, Economist, dated 28Jan 2012
IJSER © 2013 http://www.ijser.org